Brand: SUNX
Model: NA2-N28D NA2-N28P
Supply voltage: 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Sensing range: 5 m
Sensing height: 540 mm
Output :
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operation: ON when all beam channels are received (OFF when one or more beam channels are interrupted)
Response time: 10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:Emitter
Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:Receiver Operation indicator: Red LED (lights up when one or more beam channels are interrupted)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Payment Method : Model: NA2-N28D NA2-N28P
Supply voltage: 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Sensing range: 5 m
Sensing height: 540 mm
Output :
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operation: ON when all beam channels are received (OFF when one or more beam channels are interrupted)
Response time: 10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:Emitter
Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:Receiver Operation indicator: Red LED (lights up when one or more beam channels are interrupted)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
* When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Condition : Used, excellent and Ready to use
Available Unit : 1 set
Price : Call/Set
Condition : Used, excellent and Ready to use
Available Unit : 1 set
Price : Call/Set
Bank Transfer, Cash, PayPal
